top of page

ABRASIVE/DE-BURRING COMPOUNDS

Download
BROCHURE

Chemtrol Metal Finishing Compounds

CHEMTROL abrasive compounds have been developed through decades of experience in mass finishing. Abrasive mass finishing compounds contain insoluble abrasive for deburring and finishing operations. CHEMTROL products are particularly effective when used with hardened steel parts or parts where surface improvement is required. They contain high-quality abrasives formulated to provide high quality, uniform results. Our abrasive compounds are created to suspend in closed vibratory or tumble finishing systems.

• For normal deburring and stock removal

• White, medium abrasive for a lasting, clean finish

• Prevents corrosion of ferrous parts

Add 12-16 ounces of solution per every gallon of H2O
pH level: 9.8


      View PDS Sheet 

• Medium abrasive for short term cycles

• Economical and low foaming

• Prevents corrosion of ferrous parts

Add 12-16 ounces of solution per every gallon of H2O
pH level: 9.2


     View PDS Sheet 

• Fine abrasive for micro-inch improvement

• Premium low RMS results of <5 microinch

• Prevents corrosion of ferrous parts

Add 12-16 ounces of solution per every gallon of H2O
pH level: 9.8


      View PDS Sheet 

• Course abrasive for heavy deburring operations

• Well suited for part-on-part operations

• Low foaming formula

Add 12-16 ounces of solution per every gallon of H2O
pH level: 9.8


     View PDS Sheet 

CONTACT US

1800 AM Drive Quakertown PA 18951

bottom of page